Equivalent frame modelling of an unreinforced masonry building with flexible diaphragms
A case study
A case study was conducted to investigate the applicability of the equivalent frame modelling for the nonlinear time-history analysis of unreinforced masonry buildings with flexible diaphragms. The dynamic responses calculated from the equivalent frame models were compared against shake table test results of a full-scale two-storey stone masonry building. The investigated modelling approach reflected the simplifications commonly assumed for the global analysis of buildings; namely, considering the diaphragms to behave elastically and neglecting the stiffness and strength contributions of the out-of-plane responding walls. The sensitivity of the analysis to different idealisations of the equivalent frame, as well as to the diaphragm stiffness values, were also investigated. Discussions are provided on the accuracies and limitations of the investigated modelling approach, which may serve as a useful guidance for practical application.
Magenes G and Della Fontana A (1998). “Simplified non-linear seismic analysis of masonry buildings”. Proc. of the British Masonry Society, 8. 190-195.
Kappos AJ, Penelis GG and Drakopoulos CG (2002). “Evaluation of simplified models for lateral load analysis of unreinforced masonry buildings”. Journal of Structural Engineering, 128(7). 890-897.
Salonikios T, Karakostas C, Lekidis V and Anthoine A (2003). “Comparative inelastic pushover analysis of masonry frames”. Engineering Structures, 25. 1515-1523. DOI: https://doi.org/10.1016/S0141-0296(03)00118-4
Lagomarsino S, Penna A, Galasco A and Cattari S (2013). “TREMURI program: An equivalent frame model for the nonlinear seismic analysis of masonry buildings”. Engineering Structures, 56. 1787-1799. DOI: https://doi.org/10.1016/j.engstruct.2013.08.002
American Society of Civil Engineers (2014). “Seismic evaluation and retrofit of existing buildings”. ASCE/SEI 41-13, American Society of Civil Engineers, Reston, Virginia, 518 pp.
Tena-Colunga A and Abrams DP (1992). “Response of an unreinforced masonry building during the Loma Prieta earthquake”. Structural Research Series 576, Department of Civil Engineering, University of Illinois at Urbana-Champaign, 288 pp.
Costley AC and Abrams DP (1995) “Dynamic response of unreinforced masonry buildings with flexible diaphragms”. Structural Research Series 605, Department of Civil Engineering, University of Illinois at Urbana-Champaign, 281 pp.
Dizhur D, Ingham JM, Moon L, Griffith MC, Schultz A, Senaldi I, Magenes G, Dickie J, Lissel S, Centeno J, Ventura C, Leite J and Lourenço P (2011). “Performance of masonry buildings and churches in the 22 February 2011 Christchurch earthquake”. Bulletin of New Zealand Society for Earthquake Engineering, 44(4). 279-296. DOI: https://doi.org/10.5459/bnzsee.44.4.279-296
Aleman J, Mosqueda G and Whittaker A (2015). “Seismic analysis of multi-story unreinforced masonry buildings with flexible diaphragms”. MCEER Report-15-0001, University of Buffalo, State University of New York, 407 pp.
Derakhshan H, Griffith MC and Ingham JM (2015). “Out-of-plane seismic response of vertically spanning unreinforced masonry walls connected to flexible diaphragms”. Earthquake Engineering and Structural Dynamics. In Press. DOI: 10.1002/eqe.2671. DOI: https://doi.org/10.1002/eqe.2671
Magenes G, Penna A, Senaldi I, Rota M and Galasco A (2014). “Shaking table test of a strengthened full-scale stone masonry building with flexible diaphragms”. International Journal of Architectural Heritage: Conservation, analysis and restoration, 8(3). 349-375.
Giongo I, Wilson A, Dizhur D, Derakhshan H, Tomasi R, Griffith M, Quenneville P and Ingham JM (2014). “Detailed seismic assessment and improvement procedure for vintage flexible timber diaphragms”. Bulletin of New Zealand Society for Earthquake Engineering, 47(2). 97-118. DOI: https://doi.org/10.5459/bnzsee.47.2.97-118
Bringola A, Pampanin S and Podesta S (2012). “Experimental evaluation of the in-plane stiffness of timber diaphragms”. Earthquake Spectra. 28(4). 1687-1709.
Kim S-C and White DW (2004). “Nonlinear analysis of a one-story low-rise masonry building with a flexible diaphragm subjected to seismic excitation”. Engineering Structures, 26. 2053 - 2067.
Penna A, Lagomarsino S and Galasco A (2014). “A nonlinear macroelement model for the seismic analysis of masonry buildings”. Earthquake Engineering and Structural Dynamics, 43(2). 159-179. DOI: https://doi.org/10.1002/eqe.2335
Magenes G, Penna A, Galasco A and Da Paré M (2010). “In-plane cyclic shear tests of undressed double-leaf stone masonry panels”. Proceedings of 8th International Masonry Conference (8IMC), Dresden, Germany, July 4 – 7, Paper No 216.
Dolce M (1989). “Schematizzazione e modellazione degli edifice in muratura sogetti ad azioni sismiche (Modelling of masonry buildings under seismic loads)”. L’industria delle Construzioni, 242. 44-57. (in Italian).
Wilson A, Quenneville P and Ingham JM (2013). “Natural period and seismic idealization of flexible timber diaphragms”. Earthquake Spectra, 29(3). 1003-1019. DOI: https://doi.org/10.1193/1.4000162
Chopra A (2007) “Dynamics of Structures - theory and application to earthquake engineering”. 3rd Edition, Prentice Hall, New Jersey, 876 pp.
Standards Australia (2007). “AS 1170.4 - 2007: Structural design actions. Part 4: Earthquake actions in Australia”. Standards Australia, Sydney, 52 pp.
Copyright (c) 2016 Yasuto Nakamura, Hossein Derakhshan, Abdul H. Sheikh, Jason M. Ingham, Michael C. Griffith
This work is licensed under a Creative Commons Attribution 4.0 International License.