Steel seismic design

  • G. W. Butcher


This paper is a revision of a paper from the proceedings of a Seminar on "Seismic Problems in Structural Engineering" arranged by the Departments of Civil Engineering and Extension Studies of the University of Canterbury held in Christchurch from 13 - 16 May 1968.


Park, R. (1968) "Ductility of Reinforced Concrete Frames Under Seismic Loading" N.Z. Engineering 23 (11) 15 November 1968.

- (1967) "The Prince William Sound Alaska Earthquake of 1964 and Aftershocks" Volume II Part A U.S. Department of Commerce.

Wolfram, H.G. (1965) "Welded Beam - Column Connections for Multi-Storey Buildings" Proc. 13th Nat. Conventions Australian Welding Institute.

- (1968) "Recommended Lateral Force Requirements and Commentary" S.E.A.O.C.

Calambos, T.V. (1968) "Deformation and Energy Absorption Capacity of Steel Structures in the Inelastic Range" A.I.S.I. Steel Research for Construction Bulletin No. 8, March 1968.

- (1969) "Specification for the Design, Fabrication and Erection of Structural Steel for Buildings" A.I.S.C.

Lay & Galambos, T.V. (1967) "Inelastic Beams Under Moment Gradient" Journal of the Structural Division A.S.C.E. Vol. 93, No. ST1, Paper 5110, February 1967.

Lukey, A.F. & Adams, P.F. (1969) "Rotation Capacity of Beams Under Moment Gradient" Journal of the Structural Division A.S.C.E. Vol. 95, No. St6, Paper 6599, June 1969.

Bertero, V.V. & Popov, E.P. (1965) "Effect of Large Alternating Strains on Steel Beams" Journal of the Structural Division A.S.C.E. Vol. 91, No. ST1, Paper 4217, February 1965.

Popov, E.P. & Pinkney, R.B. (1967) "Behaviour of Steel Building Connections Subjected to Repeated Strain Reversal" S.E.S.M. 67-30 University of California December 1967.

- (1968) B.S. 4360: 1968 "Specification for Weldable Structural Steels" British Standards Institution.

(1964) B.S. 1856: 1964 "Specification of General Requirements for the Metal Arc Welding of Mild Steel" British Standards Institution.

(1965) B.S. 2642: 1965 “Specifications of general requirements for the arc Welding of Steel to B.S. 968 and Similar Steels" British Standards Institution.

Fisher, J.W. & Driscoll, G.C. (1959) "Corner Connections Loaded in Tension" Welding Research Supplement to the Welding Journal November 1959.

- (1959) B.S. 449: 1959 "Specification for the Use of Structural Steel in Building" British Standards Institution.

O'Connor, C. (1969) "Structural Implications of Fracture Tests on Al Steel" The Institution of Engineers Australia Civil Engineering Transaction April 1969.

Alting, T.J. (1968) "Post War Developments In Shipbuilding Steels" Acier-Stahl-Steel No, 12, 1968.

- (1966) Proceedings of the Conference on Structural Steelwork B.C.S.A. P.20.

Tipper, C.F. (1962) "The Brittle Fracture Story" Cambridge University Press P.173.

Pellini, W.S, & Puzak, P.O. (1963) N.R.L. Report 5920 March 1963, U.S. Office of Naval Research.

Gurney, T.R. (1968) "The Fatigue of Welded Structures" Cambridge University Press P.185.

Popov, E.P. (1967) Initial Draft of Section 6.4 "Commentary on Plastic Design In Steel" A.S.C.E. Manual No. 41, 1961 (Proposed Revision).

Driscoll, G.C. etal (1965) "Plastic Design of Multi-Storey Frames" Lehigh University.

Bertero, V.V. (1969) "Seismic Behaviour of Steel Beam to Column Connection Subassemblages" 4th World Conference Earthquake Engineering, Chile 1969.

Heyman, J. & Leckie, F.A. (1968) "Engineering Plasticity" Cambridge University Press, p.p.47 and 54.

Shields, D.C. (1968) "Cost Factors in Structural Steel" Proceedings 37th Annual Convention S.E.A.O.C.

(1968) P.W.81/10/1: 1968 Code of Practice "Design of Public Buildings" December 1968, M.O.W., New Zealand.

(1964) "Fully Rigid Multi-Storey Welded Steel Frames" Joint Committee Report, The Institution of Structural Engineers, The Institute of Welding, December 1964.

(1968) "Plastic Design of Braced Multi-Storey Steel Frames" A.I.S.I. 1968.

Driscoll, G.C., Armacost, J.O., Hansell, W.C. (1970) "Plastic Design of Multi-Storey Frames by Computer" Journal of the Structural Division A.S.C.E. Vol. 96, No. ST1, Paper 6995, January 1970.

Popov, E.P. & Pinkney, R.B. (1969) "Reliability of Steel Beam - Column Connection Under Cyclic Loading" 4th World Conference on Earthquake Engineering, Chile 1969.

How to Cite
Butcher, G. W. (1970). Steel seismic design. Bulletin of the New Zealand Society for Earthquake Engineering, 3(2), 60-83.

Most read articles by the same author(s)

1 2 > >>