Seismic performance of non-structural elements (SPONSE) and Learning from earthquakes (LFE)

NZ Perspective

  • Rajesh Dhakal University of Canterbury, New Zealand

References

Haymes K, Sullivan TJ and Chandramohan R (2020). “A practice oriented method for estimating elastic floor response spectra”. Bulletin of the New Zealand Society for Earthquake Engineering, 53(3): 116-136. https://doi.org/10.5459/bnzsee.53.3.116-136

Carradine DN, Kumar A, Fairclough R and Beattie G (2020). “Serviceability fragility functions for New Zealand residential windows”. Bulletin of the New Zealand Society for Earthquake Engineering, 53(3): 137-143. https://doi.org/10.5459/bnzsee.53.3.137-143

Arifin F, Sullivan TJ and Dhakal RP (2020). “Experimental investigation into the seismic fragility of a commercial glazing system”. Bulletin of the New Zealand Society for Earthquake Engineering, 53(3): 144-149. https://doi.org/10.5459/bnzsee.53.3.144-149

Pourali A, Dhakal RP and MacRae GA (2014). “Seismic performance of suspended ceilings: Critical review of current design practice”. Annual Conference of the New Zealand Society for Earthquake Engineering (NZSEE2014), 21-23 March, Auckland, 8pp.

Dhakal RP, Rashid M, Bhatta J, Chen C, Song GQ, Sullivan TJ, MacRae GA, Clifton GC, Jia LJ and Xiang P (2020). “Shake table testing plan for multiple non-structural elements and contents in a low–damage structural steel building”. 17th World Conference on Earthquake Engineering (17WCEE), September 27-2 October 2021, Sendai, Japan, 12pp.

Arifin F, De Francesco G, Sullivan TJ and Dhakal RP (2020). “Developing guidelines for the seismic assessment of glazing systems”. Annual Conference of the New Zealand Society for Earthquake Engineering (NZSEE2020), Wellington, 10pp.

Dhakal RP, Pourali A, Tasligedik S, Yeow T, Baird A, MacRae G, Pampanin S and Palermo A (2016). “Seismic performance of non-structural components and contents in buildings: An overview of New Zealand research”. Earthquake Engineering and Engineering Vibration, 15(1): 1-17. https://doi.org/10.1007/s11803-016-0301-9

Dhakal RP, MacRae GA, Pourali A and Paganotti G (2016). “Seismic fragility of suspended ceiling systems used in New Zealand based on component tests”. Bulletin of the New Zealand Society for Earthquake Engineering, 49(1): 45-63. https://doi.org/10.5459/bnzsee.49.1.45-63

Dhakal RP, Pourali A and Saha S (2016). “Simplified seismic loss functions for suspended ceilings and drywall partitions”. Bulletin of the New Zealand Society for Earthquake Engineering, 49(1): 64-78. https://doi.org/10.5459/bnzsee.49.1.64-78

Pourali A, Dhakal RP, MacRae G and Tasligedik S (2017). “Fully-floating suspended ceiling system: Experimental evaluation of structural feasibility and challenges”. Earthquake Spectra, 33(4): 1627-1654. https://doi.org/10.1193/092916EQS163M

T Yeow, G MacRae, RP Dhakal and B Bradley (2018). “Validating the sliding mechanics of office type furniture using shake-table experiments”. Bulletin of the New Zealand Society for Earthquake Engineering, 51(1): 1-11. https://doi.org/10.5459/bnzsee.51.1.1-11

Khakurel S, Yeow TZ, Chen F, Wang Z, Saha SK and Dhakal RP (2019). “Development of cladding contribution functions for seismic loss estimation”. Bulletin of the New Zealand Society for Earthquake Engineering, 52(1): 23-43. https://doi.org/10.5459/bnzsee.52.1.23-43

Mulligan J, Sullivan TJ and Dhakal RP (2020). “Experimental seismic performance of partly-sliding partition walls”. Journal of Earthquake Engineering. https://doi.org/10.1080/13632469.2020.1733139

Bhatta J, Dhakal RP, Sullivan TJ and Lanyon M (2020). “Low-damage rocking precast concrete cladding panels: Design approach and experimental validation”. Journal of Earthquake Engineering, (Accepted for publication).

Khakurel S, Dhakal RP, Yeow T and Saha S (2020). “Performance group weighting factors for rapid seismic loss estimation of buildings of different usage”. Earthquake Spectra. https://doi.org/10.1177/8755293019901311

Dhakal RP (2010). “Damage to non-structural components and contents in 2010 Darfield earthquake”. Bulletin of the New Zealand Society for Earthquake Engineering, 43(4): 404-411. https://doi.org/10.5459/bnzsee.43.4.404-411

Dhakal RP, MacRae G and Hogg K (2011). “Performance of ceilings in the February 2011 Christchurch earthquake”. Bulletin of the New Zealand Society for Earthquake Engineering, 44(4): 377-387. https://doi.org/10.5459/bnzsee.44.4.377-387

Baird A and Ferner H (2017). “Damage to non-structural elements in the 2016 Kaikōura earthquake”. Bulletin of the New Zealand Society for Earthquake Engineering, 50(2): 187-193. https://doi.org/10.5459/bnzsee.50.2.187-193

Bradley BA, Dhakal RP, Cubrinovski M and MacRae GA (2009). “Seismic loss estimation for efficient decision making”. Bulletin of the New Zealand Society for Earthquake Engineering, 42(2): 96-110. https://doi.org/10.5459/bnzsee.42.2.96-110

MacRae GA, Pampanin S, Dhakal RP and Palermo A (2012). “Review of Design and Installation Practices of Non-Structural Elements”. Report for the Engineering Advisory Group, Department of Building and Housing, Wellington, 82pp. http://www.naturalhazards.org.nz/NHRP/Publications/Research-Publications/Short-Term-Recovery-Programme

Ferner H, Lander M, Douglas G, Baird A, Wemyss M and Hunter D (2016). “Pragmatic improvements to seismic resilience of non-structural elements”. Bulletin of the New Zealand Society for Earthquake Engineering, 49(1): 22-33. https://doi.org/10.5459/bnzsee.49.1.22-33

Ferner H, Jury R, King A, Wemyss M and Baird A (2016). “Performance objectives for non-structural elements”. Bulletin of the New Zealand Society for Earthquake Engineering, 49(1): 79-85. https://doi.org/10.5459/bnzsee.49.1.79-85

Stanway J and Curtain B (2017). “Economic Benefits of Code Compliant Non-structural Elements in New Buildings”. Opus Report for Ministry of Business Innovation & Employment (MBIE), Wellington, 52pp.

Stanway J, Sullivan T and Dhakal RP (2018). “Towards a new delivery approach to improve the performance of non-structural elements in New Zealand”. 17th US-Japan-New Zealand Workshop on the Improvement of Structural Engineering and Resilience, 12-14 November, Queenstown, 8pp.

Sullivan TJ, Dhakal RP and Stanway J (2020). “A framework for the seismic rating of non-structural elements in buildings”. 17th World Conference on Earthquake Engineering (17WCEE), September 27-2 October 2021, Sendai, Japan.

Stanway J, Sullivan T and Dhakal RP (2020). “Design, construction and seismic performance of non-structural elements in New Zealand”. 2020 SEAOC Convention, 9-12 September, Hawaii, 11pp.

Mulligan J, Sullivan TJ and Dhakal RP (2021). “Experimental study of the seismic performance of plasterboard partition walls with seismic gaps”. Bulletin of the New Zealand Society for Earthquake Engineering, (Accepted for Publication).

MBIE, NZSEE, SESOC, EQC and NZGS (2017). “The Seismic Assessment of Existing Buildings – Technical Guidelines for Engineering Assessments”. Ministry of Business Innovation and Employment, New Zealand Society for Earthquake Engineering, Earthquake Commission, New Zealand Geotechnical Society, Wellington. http://www.eq-assess.org.nz

Roeslin S, Huarez-Garcia H, Elwood KJ, Dhakal RP and Gomez-Bernal A (2020). “The September 19th, 2017 Puebla, Mexico earthquake: Final report of the New Zealand reconnaissance team”. Bulletin of the New Zealand Society for Earthquake Engineering, 53(3): 150-172. https://doi.org/10.5459/bnzsee.53.3.150-172

Butcher G, Hopkins D, Jury R, Massey W, McKay G and McVerry G (1988). “The September 1985 Mexico Earthquakes”. Bulletin of the New Zealand Society for Earthquake Engineering, 21(1): 3-96. https://doi.org/10.5459/bnzsee.21.1.3-96

Yu J, Yong P, Read S, Brabhaharan P and Foon M (2010). “The Ms 8.0 Wenchuan earthquake of 12 May 2008 reconnaissance report”. Bulletin of the New Zealand Society for Earthquake Engineering, 43(1): 41-83. https://doi.org/10.5459/bnzsee.43.1.41-83

Bothara J, Beetham D, Brunsdon D, Stannard M, Brown R, Hyland C, Lewis W, Miller S, Sanders R and Sulistio Y (2010). “General observations of effects of the 30th September 2009 Padang earthquake, Indonesia”. Bulletin of the New Zealand Society for Earthquake Engineering, 43(3): 143-173. https://doi.org/10.5459/bnzsee.43.3.143-173

Dizhur D, Dhakal RP, Bothara J and Ingham JM (2016). “Building typologies and failure modes observed in the 2015 Gorkha (Nepal) earthquake”. Bulletin of the New Zealand Society for Earthquake Engineering, 49(2): 211-232. https://doi.org/10.5459/bnzsee.49.2.211-232

Chiaro G, Alexander G, Brabhaharan P, Massey C, Koseki J, Yamada S and Aoyagi Y (2017). “Reconnaissance report on geotechnical and geological aspects of the 14-16 April 2016 Kumamoto earthquakes, Japan”. Bulletin of the New Zealand Society for Earthquake Engineering, 50(3): 365-393. https://doi.org/10.5459/bnzsee.50.3.365-393

Sarrafzadeh M, Elwood KJ, Dhakal RP, Ferner H, Pettinga D, Stannard M, Maeda M, Nakano Y, Mukai T and Koike T (2017). “Performance of reinforced concrete buildings in the 2016 Kumamoto earthquakes and seismic design in Japan”. Bulletin of the New Zealand Society for Earthquake Engineering, 50(3): 394-435. https://doi.org/10.5459/bnzsee.50.3.394-435

Henry RS, Lee B-Y, McGuigan D, Finnegan J and Ashby G (2017). “The 2016 Meinong Taiwan earthquake”. Bulletin of the New Zealand Society for Earthquake Engineering, 50(3): 436-468. https://doi.org/10.5459/bnzsee.50.3.436-468

Published
2020-09-01
How to Cite
Dhakal, R. (2020). Seismic performance of non-structural elements (SPONSE) and Learning from earthquakes (LFE). Bulletin of the New Zealand Society for Earthquake Engineering, 53(3), 113-115. https://doi.org/10.5459/bnzsee.53.3.113-115
Section
Editorials