The serviceability of normal-use, non-domestic buildings in earthquakes
Are serviceability design checks necessary?
DOI:
https://doi.org/10.5459/bnzsee.39.4.208-214Abstract
This paper reports on an empirical study of whether it is necessary to carry out design checks on the serviceability of normal-use non-domestic buildings in earthquakes in New Zealand. It is found that at the relevant hazard level, i.e. at a return period of 25 years, the highest intensity anywhere in New Zealand is Modified Mercalli VII (MM7). At that intensity, no loss of function (predictable by a serviceability design check) has been reported in any structures classified as Buildings Type III (brittle) or better, since the introduction of reinforced concrete construction. For normal-use non-domestic structures designed for the ultimate limit state earthquake loading, the author contends (with one interim proviso affecting 10 percent of the country) that serviceability can be deemed to be satisfactory for new buildings anywhere in the New Zealand.
References
Dowrick, D.J., (1996). “The Modified Mercalli intensity scale – revisions arising from recent studies of New Zealand earthquakes”, Bulletin New Zealand National Society for Earthquake Engineering, 34(3): 191-213. DOI: https://doi.org/10.5459/bnzsee.34.3.191-213
Dowrick, D.J. and Cousins, W.J., (2003). “Historical incidence of Modified Mercalli intensity in New Zealand and comparisons with hazard models”, Bulletin New Zealand Society for Earthquake Engineering, 36(1): 1-24. DOI: https://doi.org/10.5459/bnzsee.36.1.1-24
Dowrick, D.J. and Rhoades, D.A., (1993). “Damage costs for commercial and industrial property as a function of intensity in the 1987 Edgecumbe earthquake”, Earthquake Engineering and Structural Dynamics, 22 : 869-884. DOI: https://doi.org/10.1002/eqe.4290221004
Dowrick, D.J. and Rhoades, D.A., (1995). “Damage ratios for plant, equipment and stock in the 1987 Edgecumbe, New Zealand earthquake”, Bulletin New Zealand National Society for Earthquake Engineering, 28(4): 265-278. DOI: https://doi.org/10.5459/bnzsee.28.4.265-278
Dowrick, D.J. and Rhoades, D.A., (1997). “Vulnerability of different classes of low-rise buildings in the 1987 Edgecumbe, New Zealand, earthquake”, Bulletin New Zealand National Society for Earthquake Engineering), 30(3): 135-148. DOI: https://doi.org/10.5459/bnzsee.30.3.227-241
Dowrick, D.J. and Rhoades, D.A., (2000). “Earthquake damage and risk experience and modelling in New Zealand”, Proceedings 12th World Conference on Earthquake Engineering, Auckland. CD Rom.
Dowrick, D.J. and Rhoades, D.A., (2002). “Damage ratios for low-rise non-domestic brick buildings in the magnitude 7.1 Wairarapa, New Zealand, earthquake of 24 June 1942”, Bulletin New Zealand Society for Earthquake Engineering, 35(3): 135-148. DOI: https://doi.org/10.5459/bnzsee.35.3.135-148
Dowrick, D.J. and Rhoades, D.A., (2003). “Risk of casualties in New Zealand earthquakes”, Proceedings Pacific Conference on Earthquake Engineering, Christchurch. CD Rom.
Johnstone, P.G. and Potangaroa, R., (1993). “Reconnaissance report on the Weber earthquake – 13 May 1990”, Bulletin New Zealand Society for Earthquake Engineering, 26(2): 222-239. DOI: https://doi.org/10.5459/bnzsee.26.2.222-239
NZS 1170.5, (2004). “Structural design actions (Parts 0 and 5)”, Standards New Zealand.
