A simple model to quantify rocking isolation
DOI:
https://doi.org/10.5459/bnzsee.51.1.12-22Abstract
Rocking action at the foundation-structure interface has long been proposed to isolate structures from strong ground motion. In this paper, the fundamental concept of rocking isolation is examined in depth to guide further design efforts. This is achieved by first deriving an analytical model of a flexible structure freely rocking on rigid ground. Decomposing the coupled equations of motion of the model into their modal components provides new information on the mechanics of rocking isolation. After identifying the salient parameters needed to quantify rocking isolation, equations to predict the lateral accelerations, base shear and overturning moments arising during rocking are provided. The analytical model and the simplified equations are then validated using some of the earliest experiments on rocking structures, which were completed in New Zealand. These validations clarify poorly understood phenomena concerning rocking isolation, such as how rocking and vibrations of the structure couple, how this influences the excitation mechanisms of the structure, resulting in seismic shear forces and overturning moments larger than those required for uplift. The findings provide an analytical basis for designing efficient rocking systems that successfully limit force demands.
References
Housner GW (1963). “Behaviour of inverted pendulum structures during earthquakes”. Bulletin of the Seismological Society of America, 53(2): 403–417.
Beck JL and Skinner RI (1973). “The seismic response of a reinforced concrete bridge pier designed to step”. Earthquake Engineering & Structural Dynamics, 2(4): 343–358. DOI: https://doi.org/10.1002/eqe.4290020405
Sharpe RD and Skinner RI (1983). “The seismic design of an industrial chimney with rocking base”. Bulletin of the New Zealand National Society for Earthquake Engineering, 16(2): 98–106.
Evison RJ (1977). “Rocking Foundations”. Master Thesis. University of Canterbury, Canterbury.
McManus KJ (1980). “The Seismic Response of Bridge Structures Free to Rock on Their Foundations”. Master Thesis, University of Canterbury, Canterbury.
Kelly JM and Tsztoo DF (1977). “Earthquake simulation testing of a stepping frame with energy-absorbing devices”. Bulletin of the New Zealand National Society for Earthquake Engineering, 10(4): 196–207.
Skinner RI, Tyler RG, Heine AJ and Robinson WH (1980). “Hysteretic dampers for the protection of structures from earthquakes”. Bulletin of the New Zealand National Society for Earthquake Engineering, 13(1): 22–36.
Kelly TE (2009). “Tentative seismic design guidelines for rocking structures”. Bulletin of the New Zealand National Society for Earthquake Engineering, 42(4): 239–274. DOI: https://doi.org/10.5459/bnzsee.42.4.239-274
Acikgoz S and DeJong MJ (2012). “The interaction of elasticity and rocking in flexible structures allowed to uplift”. Earthquake Engineering & Structural Dynamics, 41(15): 2177–2194. DOI: https://doi.org/10.1002/eqe.2181
Acikgoz S and DeJong MJ (2013). “The rocking response of large flexible structures to earthquakes.” Bulletin of Earthquake Engineering, 12(2): 875–908. DOI: https://doi.org/10.1007/s10518-013-9538-0
Meek JW (1975). “Effects of foundation tipping on dynamic response”. Journal of the Structural Division, 101(7): 1297–1311.
Chopra AK and Yim CS (1985). “Simplified earthquake analysis of structures with foundation uplift”. Journal of Structural Engineering, 111(12): 2708–2731. DOI: https://doi.org/10.1061/(ASCE)0733-9445(1985)111:12(2708)
Acikgoz S and DeJong MJ (2016). “Analytical modelling of multi-mass flexible rocking structures”. Earthquake Engineering & Structural Dynamics, 45(13): 2103–2122. DOI: https://doi.org/10.1002/eqe.2735
Acikgoz S, Ma QT, Palermo A and DeJong MJ (2016). “Experimental identification of the dynamic characteristics of a flexible rocking structure.” Journal of Earthquake Engineering, 20(8): 1–23. DOI: https://doi.org/10.1080/13632469.2016.1138169
Acikgoz S and DeJong MJ (2016). “Vibration modes and equivalent models for flexible rocking structures”. Bulletin of Earthquake Engineering, In Press.
Giouvanidis AI and Dimitrakopoulos EG (2016). “Nonsmooth dynamic analysis of sticking impacts in rocking structures”. Bulletin of Earthquake Engineering, In Press.
Truniger R, Vassiliou MF and Stojadinovic B (2015). “An analytical model of a deformable cantilever structure rocking on a rigid surface: experimental validation”. Earthquake Engineering & Structural Dynamics, 44(15): 2795–2815. DOI: https://doi.org/10.1002/eqe.2609
ElGawady MA, Ma QT, Butterworth JW and Ingham JM (2010). “Effects of interface material on the performance of free rocking blocks”. Earthquake Engineering & Structural Dynamics, 40(4): 375–392. DOI: https://doi.org/10.1002/eqe.1025
Huang NE, Shen Z, Long SR, Wu MC, Shih HH, Zheng Q Yen NC, Tung CC and Liu HH (1998). “The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysis”. Proceedings of the Royal Society of London Series A: Mathematical, Physical, and Engineering Sciences, 454(1971): 903–995. DOI: https://doi.org/10.1098/rspa.1998.0193
Ma QT (2010). “Mechanics of Rocking Structures Subjected to Ground Motion”. PhD Thesis. University of Auckland, Auckland.