New contributions to the international workshop on the seismic and retrofitting of reinforced concrete bridges Bormio, Italy, April 2-5, 1991
The main objective of the workshop was to provide a critical comparison of the current state-of-the-art and of the practice in reinforced concrete bridge seismic design and retrofitting between the main seismically active regions. A secondary objective was to produce a clear statement of research needs and to propose possible international research cooperation. Four points of view were to be considered and compared, according to a geographical base which also corresponds to different design philosophies: the European, American, Japanese and New Zealand approaches were to be discussed. Emphasis was to be put on discussion of unresolved differences between different design and research practices. The workshop was organised in four sections, dealing with (1) basic concepts, (2) detailing, (3) examples of application, and (4) retrofitting. Each section was to consist of a presentation from each of the groups involved and an in-depth discussion session.
Hollings J. P., Fraser I. A. N., “Earthquake Damage to Three Railway Bridges 1968 Inangahua Earthquake”, Bulletin of New Zealand National Society for Earthquake Engineering, Vol 1 No 2 Dec 1968. DOI: https://doi.org/10.5459/bnzsee.1.2.22-48
EVANS G. L., “The Behaviour of Bridges under Earthquake”, Proceedings of New Zealand Roading Symposium 1971, Vol 2 pp 664-691, National Roads Board, Wellington 1972.
RODRIGUEZ M., PARK R., "Seismic Load Tests of Reinforced Concrete Columns Strengthened by Jacketing", Proceedings of New Zealand Concrete Society Conference September 1990, pp 72-83, NZ Concrete Society, Wellington 1990.
BLAKELEY R.W.G., "Analysis and Design of Bridges Incorporating Mechanical Energy Dissipating Devices for Earthquake Resistance", Proceedings of a Workshop on Earthquake Resistance of Highway Bridges, January 1979, pp 313-342, Applied Technology Council, ATC- 6, California USA, November 1979.
CHAPMAN H.E., KIRKCALDIE D.K., "Seismic Design of Base Isolated Bridges Incorporating Mechanical Energy Dissipators", Bridge Design and Research Seminar Volume 3 (43 pages and addendum), Transit New Zealand, Wellington 1990.
TYLER R. G., "Tapered Steel Energy Dissipaters for Earthquake Resistant Structures", Bulletin of the New Zealand National Society for Earthquake Engineering, Vol 11, no 4, pp 282-294. DOI: https://doi.org/10.5459/bnzsee.11.4.282-294
STUART C.R., "Seismic Retrofitting of Bridges in New Zealand", Proceedings of Second Joint US - New Zealand Workshop on Seismic Resistance of Highway Bridges, May 1985, pp 157-161, Applied Technology Council, ATC-12-1, California USA, 1986.
Copyright (c) 1991 R. Park, H. E. Chapman, L. G. Cormack, P. J. North
This work is licensed under a Creative Commons Attribution 4.0 International License.