Materials and workmanship

Authors

  • G. R. McKay Ministry of Works and Development, Wellington, New Zealand

DOI:

https://doi.org/10.5459/bnzsee.18.4.400-405

Abstract

This paper is the result of deliberations of the Society's Study Group for the seismic design of steel structures.

References

Australian Welding Research Association, Technical Note 6, "Control of Lamellar Tearing", April 1976.

Bertero, Vitelmo V. and Popov, Egor P., "Effect of Large Alternating Strains on Steel Beams, "Journal of the Structural Division ASCE, February 1965, Vol. 91, No. ST1, pp. 1-12.

New Zealand Standard 4203, "Code of Practice for General Structural Design and Design Loadings for Buildings", Standards Assoc. of N.Z., 1984.

New Zealand Standard 3404, "Code for the Design of Steel Structures", Standards Assoc. of N.Z., 1977.

Australian Standard 1250, "SAA Steel Structures Code", Standards Assoc. of Austr., 1981.

New Zealand Standard 4701, "Metal-Arc Welding of Steel Structures", Standards Assoc. of N.Z., 1981.

Australian Standard 2121, "SAA Earth- quake Code", Standards Assoc. of Austr., 1979.

Applied Technology Council, California, ATC-3-06, "Tentative Provisions for the Development of Seismic Regulations for Buildings", 1978.

Seismology Committee, Structural Engineers Association of California, "Recommended Lateral Force Requirements and Commentary", 1980.

International Conference of Building Officials, "Uniform Building Code", 1982 edition.

ASTM A36-81a, "Specification for Structural Steel", and A441-81, "Specification for High-Strength Low Alloy Structural Mangarese Varadium Steel", Amer. Soc. for Testing and Materials, Philadelphia, 1981.

Owens, G.W., Driver, P.J. and Krige, G.J., "Punched Holes in Structural Steelwork", Journal of Constructional Steel Research, May 1981. DOI: https://doi.org/10.1016/0143-974X(81)90006-7

Polmear, I.J., Tuisk , U.U., Stephens , P.J. and Voreng, P.R.B., "Fatigue Characteristics of a Simple Bolted Joint", The Institution of Engineers, Australia, Civil Engineering Transactions, October 1971.

Downloads

Published

31-12-1985

How to Cite

McKay, G. R. (1985). Materials and workmanship. Bulletin of the New Zealand Society for Earthquake Engineering, 18(4), 400–405. https://doi.org/10.5459/bnzsee.18.4.400-405

Issue

Section

Articles

Categories