Editorial

Authors

DOI:

https://doi.org/10.5459/bnzsee.52.2.i-ii

References

Van Dissen RJ et al (2019). “Impacts of Surface Fault Rupture on Residential Structures during the 2016 MW 7.8 Kaikoura Earthquake, New Zealand”. Bulletin of the NZ Society for Earthquake Engineering, 52(1): 1-22, DOI: 10.5459/bnzsee.52.1.1-22. DOI: https://doi.org/10.5459/bnzsee.52.1.1-22

Khakurel S, Yeow TZ, Chen F, Wang Z, Saha S and Dhakal RP (2019). “Development of Cladding Contribution Functions for Seismic Loss Estimation”. Bulletin of the NZ Society for Earthquake Engineering, 52(1): 23-43, DOI: 10.5459/bnzsee.52.1.23-43. DOI: https://doi.org/10.5459/bnzsee.52.1.23-43

Au EV, MacRae G, Pettinga D, Deam B, Sadashiva V and Soleimankhani H (2019). “Seismic Response of Torsionally Irregular Single Story Structures”. Bulletin of the NZ Society for Earthquake Engineering, 52(1): 44-53, DOI: 10.5459/bnzsee.52.1.44-43.

Liu A and Carradine D (2019). “Seismic Bracing Performance of Plasterboard Timber Walls”. Bulletin of the NZ Society for Earthquake Engineering, 52(2): 56-66, DOI: 10.5459/bnzsee.52.2.56-66. DOI: https://doi.org/10.5459/bnzsee.52.2.56-66

Liu A, Li M and Shelton R (2019). “Experimental Studies on In-Plane Performance of Plasterboard Sheathed Ceiling Diaphragms”. Bulletin of the NZ Society for Earthquake Engineering, 52(2): 95-107, DOI: 10.5459/bnzsee.52.2.95-107.

Dhakal RP, Pourali A, Tasligedik S, Yeow T, Baird A, MacRae G, Pampanin S and Palermo A (2016). “Seismic Performance of Non-Structural Components and Contents in Buildings: An Overview of NZ Research”. Earthquake Engineering and Engineering Vibration, 15(1). DOI: https://doi.org/10.1007/s11803-016-0301-9

Filiatrault A and Sullivan T (2016). “Special Issue: Seismic Performance of Non-Structural Elements”. Bulletin of the NZ Society for Earthquake Engineering, 49(1): 148p.

Yeow TZ, MacRae G, Dhakal RP and Bradley B (2018). “Validating the Sliding Mechanics of Office-Type Furniture using Shake-Table Experiments”. Bulletin of the NZ Society for Earthquake Engineering, 51(1): 1-11. DOI: https://doi.org/10.5459/bnzsee.51.1.1-11

Ballagh R and Cattanach A (2019). “Basin Edge Effects and Damping: A Structural Engineer’s View”. Bulletin of the NZ Society for Earthquake Engineering, 52(2): 67-77, DOI: 10.5459/bnzsee.52.2.67-77. DOI: https://doi.org/10.5459/bnzsee.52.2.67-77

Moore TA (2018). “Repairing SLS Anomalies in NZ Seismic Code to Reduce Earthquake Losses”. Bulletin of the NZ Society for Earthquake Engineering, 51(1): 34-46. DOI: https://doi.org/10.5459/bnzsee.51.1.34-46

Marriott D (2018). “Implementation of the Structural Performance Factor (SP) within a Displacement-Based Design Framework”. Bulletin of the NZ Society for Earthquake Engineering, 51(3): 159-165. DOI: https://doi.org/10.5459/bnzsee.51.3.159-165

DK Kirkcaldie (2018). “Reflections on New Zealand’s Earthquake Resistant Design Approach – Can it be Improved?” Bulletin of the NZ Society for Earthquake Engineering, 51(4): 212-221. DOI: https://doi.org/10.5459/bnzsee.51.4.212-221

Baradaran MF and Behnamfar F (2019). “A Modal Seismic Design Procedure Based on a Selected Level of Ductility Demand”. Bulletin of the NZ Society for Earthquake Engineering, 52(2): 78-94, DOI: 10.5459/bnzsee.52.2.78-94. DOI: https://doi.org/10.5459/bnzsee.52.2.78-94

Downloads

Published

30-06-2019

How to Cite

Dhakal, R. P. (2019). Editorial. Bulletin of the New Zealand Society for Earthquake Engineering, 52(2), i-ii. https://doi.org/10.5459/bnzsee.52.2.i-ii

Issue

Section

Editorials