The New Zealand loadings code and its application to the design of seismic resistant prestressed concrete structures
DOI:
https://doi.org/10.5459/bnzsee.9.3.162-166Abstract
This paper was presented at the N.Z.P.C.I. 12th Annual Conference, 1976.
References
"Code of Practice for General Structural Design and Design Loadings for Buildings", NZS 4203 Standards Association of New Zealand, February, 1976.
"Building Code Requirements for Reinforced Concrete" ACI 318-71, American Concrete Institute. February, 1971.
"Basic Design Loads", NZS 1900 Chapter 8, New Zealand Standards Institute. December, 1965.
"Recommended Lateral Force Requirements and Commentary", Structural Engineers Association of California. Third Edition with Commentary 1973.
Kolston, D., "Notes on the New Zealand Earthquake Loading Provisions", Bulletin of the New Zealand National Society for Earthquake Engineering, Vol. 8, No. 2 June 1975 pp 102-113. DOI: https://doi.org/10.5459/bnzsee.8.2.102-113
Glogau, O. A., "Code Philosophy", Bulletin of the New Zealand National Society for Earthquake Engineering, Vol. 9, No. 1, March, 1976 , pp 43-55. DOI: https://doi.org/10.5459/bnzsee.9.1.43-55
"Recommended Lateral Force Requirements and Commentary", Structural Engineers Association of California. Fourth Edition with Partial Commentary, 1974.
Blakeley, R. W. G., "A Review of the New Code Provisions for Separation of Elements and Buildings", Bulletin of the New Zealand National Society for Earthquake Engineering, Vol. 7, No. 3, September, 1974. DOI: https://doi.org/10.5459/bnzsee.7.3.130-143
"Recommendations for the Design and Detailing of Ductile Prestressed Concrete Frames for Seismic Loading", Seismic Committee of the N.Z. Prestressed Concrete Institute. Bulletin of the New Zealand Society for Earthquake Engineering, Vol. 9, No. 2, June, 1976.
Blakeley, R. W. G., and Park, R., "Response of Prestressed Concrete Structures to Earthquake Motions", New Zealand Engineering, Vol. 2b, February, 1973. DOI: https://doi.org/10.5459/bnzsee.6.1.2-21
