Some recent research in New Zealand into aspects of the seismic resistance of prestressed concrete frames
DOI:
https://doi.org/10.5459/bnzsee.9.3.167-174Abstract
This paper was presented at the N.Z.P.C.I. 12th Annual Conference, 1976.
References
Blakeley, R. W. G., Park, R. and Shepherd, R., "A Review of the Seismic Resistance of Prestressed Concrete", Bulletin of the New Zealand Society for Earthquake Engineering, Vol. 3, No. 1, March, 1970, pp.3-23. DOI: https://doi.org/10.5459/bnzsee.3.1.3-23
"Seismic Structures", Papers of the Symposium of the Federation Internationale de la Precontrainte, Tbilisi , U.S.S.R., September, 1972, p.502.
"Report of the F.I.P. Commission on Seismic Structures", Volume 1 Commission Reports, 7th Congress of Federation Internationale de la Precontrainte, New York, 1974 , pp. 63-74.
"Building Code Requirements for Reinforced Concrete (ACI 318-71)", American Concrete Institute, Detroit, Michigan, 1971, p.78.
Seismic Committee of the New Zealand Prestressed Concrete Institute, "Recommendations for the Design and Detailing of Ductile Prestressed Concrete Frames for Seismic Loading", to be published in the Bulletin of the New Zealand Society for Earthquake Engineering.
"Recommendations for the Design of Aseismic Prestressed Concrete Structures", 2nd Draft of Commission on Seismic Structures, Federation Internationale de la Precontrainte, London, October 1975, p.10.
Blakeley, R. W. G., "Ductility of Prestressed Concrete Frames Under Seismic Loading", Ph.D. Thesis, University of Canterbury, New Zealand, 1971, p.230 plus appendices.
Thompson, K. J., "Ductility of Concrete Frames Under Seismic Loading", Ph.D. Thesis, University of Canterbury, New Zealand, 1975, p.341 plus appendices.
Thompson, K. J. and Park, R., "Cyclic Load Tests on Prestressed and Reinforced Concrete Beam-Column Joints", Research Report 76-8, Department of Civil Engineer- ing , University of Canterbury, New Zealand, June 1976, p.57.
Kent, D. C. and Park, R., "Flexural Members with Confined Concrete", Journal of the Structural Division, American Society of Civil Engineers, Vol. 97, ST.7, July, 1971, pp.1969-1990. DOI: https://doi.org/10.1061/JSDEAG.0002957
"Basic Design Loads", New Zealand Standard Bylaw, NZSS 1900, Chapter 8, 1965, p.39.
"Code of Practice for Reinforced Concrete Design", NZS 3101P.1970, Standards Association of New Zealand, p.149.
Jennings, P. C., Housner, G. W. and Tsai, N. C., "Simulated Earthquake Motions for Design Purposes", Proceedings of the 4th World Conference on Earthquake Engineering, Santiago, Chile, Vol. 1, January 1969, pp.145-160.
