A procedure for the analysis and design of ductile reinforced concrete frame buildings of moderate height
DOI:
https://doi.org/10.5459/bnzsee.8.4.260-272Abstract
A procedure is presented in step by step form for designing and detailing a reinforced concrete frame building to the requirements of DZ4203 (Draft New Zealand loading code). Consideration is given for adequate ductility by means of a capacity design approach to all members to obtain a large number of plastic hinges which are detailed to dissipate energy without brittle failure. Further ductile detailing is given for all other locations where accidental hinges could occur and to limit excessive deflections that may result from deterioration of beam column joints.
References
DZ 4203" General Structural Design and Design Loadings", 1973 Draft N.Z. Code of Practice.
P.W. 81/10/1 : 1970 Code of Practice for "Design of Public Buildings" - New Zealand Ministry of Works with amendments, May 1975.
A.C.I. 318-71 Building Code Requirements for Reinforced Concrete.
S.E.A.O.C. "Recommended Lateral Force Requirements" 1971.
"Seismic Analysis of Reinforced Concrete Buildings" - K. Muto 1965.
Ices Strudl II Computer Programme for "Frame Analysis", Massachusetts Institute of Technology.
"Ultimate Strength Design for Columns with Biaxial Bending", Weber, A.C.I. Journal November 1966.
"Design Criteria for Reinforced Columns Subject to Biaxial Bending", Breslar, A.C.I. Journal November 1960.
Seismic performance of two full size reinforced concrete beam column joint units. R. W. G. Blakeley, L. M. Megget and M. J. N. Priestley. Bulletin of the New Zealand National Society for Earthquake Engineering, Vol. 8 No. 1 March, 1975. DOI: https://doi.org/10.5459/bnzsee.8.1.38-69
M.W.D. Central Laboratory test on anchor plates ref. 81/30/5/3 of 8 December 1969.
"New Zealand Parliament Buildings Beehive", O. A. Glogau, A. J. Ballintine, R. L. Williams and H. E. Chapman. Proceedings of Fifth World Conference on Earthquake Engineering, Rome 1973.
"Earthquake resistant design of a 20 storey reinforced concrete building", K. Muto, T. Hisada, T. Tsugawa and S. Beesho. Proceedings of Fifth World Conference on Earthquake Engineering, Rome 1973.
