Influence of loading history on the response of a reinforced concrete beam

Authors

  • J.M. Ingham University of Auckland, Auckland, New Zealand http://orcid.org/0000-0002-0989-9097
  • D. Liddell Connell Wagner ltd, Auckland, New Zealand
  • B.J. Davidson University of Auckland, Auckland, New Zealand

DOI:

https://doi.org/10.5459/bnzsee.34.2.107-124

Abstract

An investigation considering the influence of loading histories on the performance of a reinforced concrete beam plastic hinge is described. Twelve loading histories were considered, including conventional procedures employed in the United States, Japan and New Zealand, and artificially generated histories derived from recorded earthquake ground motions. Details of the prototype structure and the test beam are described, followed by comprehensive reporting o f experimental data. Performance descriptors and further treatment of the experimental data are presented in a companion paper.

References

Cement and Concrete Association of New Zealand (CCANZ) (1998) "Examples of Concrete Structural Design to New Zealand Standard 3101".

Ingham, J. M. (2000) "A presentation of the PRESSS technology applied to a 39-storey building by Pankow Builders in California", New Zealand Concrete Society Conference, Wairaki, October, pp. 27-32.

Ingham, J. M., Liddell, D., and Davidson, B. J. (2001) "An Assessment of Parameters describing the Response of a Reinforced Concrete Beam", Bulletin of the New Zealand National Society for Earthquake Engineering (under review). DOI: https://doi.org/10.5459/bnzsee.35.1.1-16

Ma, S.-Y. M., Bertero, V. V., and Popov, E. P. (1976) "Experimental and Analytical Studies on the Hysteretic Behavior of Reinforced Concrete Rectangular and T-Beams" Earthquake Engineering Research Center, 76-2.

Park, R. (1989) "Evaluation of Ductility of Structures and Structural Assemblages from Laboratory Testing" Bulletin of the New Zealand National Society of Earthquake Engineering, 22(3), pp. 155-166. DOI: https://doi.org/10.5459/bnzsee.22.3.155-166

Priestley, M. J. N. (1997) "Displacement-Based Seismic Assessment of Reinforced Concrete Buildings." Journal of Earthquake Engineering, 1(1), pp. 157-192. DOI: https://doi.org/10.1080/13632469708962365

Standards New Zealand (1995) "NZS 3101:1995-New Zealand Standard for Design of Concrete Structures" 256p.

Stone, W. C., Cheok, G. S., and Stanton, J. F. (1995) "Performance of Hybrid Moment-Resisting Precast Beam-Column Concrete Connections Subjected to Cyclic Loading" ACI Structural Journal, 91(2), pp. 229-249.

Downloads

Published

30-06-2001

How to Cite

Ingham, J., Liddell, D., & Davidson, B. (2001). Influence of loading history on the response of a reinforced concrete beam. Bulletin of the New Zealand Society for Earthquake Engineering, 34(2), 107–124. https://doi.org/10.5459/bnzsee.34.2.107-124

Issue

Section

Articles

Categories