The fundamentals of an earthquake standard
DOI:
https://doi.org/10.5459/bnzsee.29.3.199-207Abstract
This paper proposes a rational framework for an earthquake design standard which could be adopted and applied internationally. Initially the standard is expected to be used within New Zealand and Australia as one component within a suite of joint structural standards which would enable design and construction practices to be applied either side of the Tasman. The framework could be easily adopted by other countries because it addresses both inter- and intra- plate earthquakes. Allowance is made for national variations to address varying levels of seismicity and different national performance expectations. The author outlines his views on the objectives and expected contents of the essential elements of an earthquake loading standard which are currently being examined in detail by a Standards Australia and Standards New Zealand working party.
References
Carr A.J. 1994. Dynamic Design of Structures. Bulletin NZ National Society for Earthquake Engineering. 27; 129-146 DOI: https://doi.org/10.5459/bnzsee.27.2.129-146
Dowrick D.J. Gibson G, and McCue K. 1995. Seismic Hazard for Australia and New Zealand. Bulletin NZ National Society for Earthquake Engineering, 28; 279-293 DOI: https://doi.org/10.5459/bnzsee.28.4.279-287
Heidebrecht A.C. 1995. Insights and Challenges Associated with Determining Seismic Design Forces in a Loading Code. Bulletin NZ National Society for Earthquake Engineering, 28; 224-247.
International Conference of Building Officials (ICBO). 1992. Uniform Building Code (UBC), Whittier, California.
Phillips R.J. & Hamburger R.O. 1995. SEAOC Proposed Major Seismic Changes in Response to Northridge. International Conference of Building Officials, Building Standards, July - Aug: 13-22
Priestley, M.J. Nigel 1993. Myths and Fallacies in Earthquake Engineering - Conflicts between Design and Reality. Bulletin NZ National Society for Earthquake Engineering, 26; 329-335. DOI: https://doi.org/10.5459/bnzsee.26.3.329-341
Standards Australia, 1993. AS 1170.4 Minimum Design Loads on Structures Part 4 - Earthquake Loads, NSW 2140, Australia.
Standards New Zealand, 1992. NZS 4203:1992 Code of Practice for General Structural Design and Design Loadings for Buildings, Wellington, New Zealand.
