Introduction and philosophy
DOI:
https://doi.org/10.5459/bnzsee.18.4.323-328Abstract
This paper is the result of deliberations of the Society's Study Group for the seismic design of steel structures.
References
Toyama, Kozo, K.I.C.T. Report No. 4, "Seismic Behaviour of Steel Bent Bracing System".
"Steel Plate Shear Walls in a Towered Hotel", Architectural Record - mid August 1970.
Canon, T.J. and Dean, R.G., "Structural Steel Plated Shear Walls", 8th World Conference on Earthquake Engineering, San Francisco, July 1984, Vol. 5, Section 8.3, pp.1237-44.
Baldelli, Joseph A., "Steel Shear Walls for Existing Buildings", Engineering Journal A.I.S.C. Vol. 20, No. 2, 1983.
Kulak, G.L., "Behaviour of Steel Plate Shear Walls", Canadian Structural Engineering Conference, 1984.
Tyler, R.G., "Preliminary Tests on Energy Absorbing Elements for Braced Structures", Bull. N.Z. National Society for Earthquake Engineering, Vol. 16, No. 3, Sept. 1983.
Tyler, R.G., "Tapered Steel Energy Dissipators for Earthquake Resistant Structures", Bull. N.Z. National Society for Earthquake Engineering, Vol. 11, No. 4, December 1979.
"Seismically Loaded Holding Down Bolts", HERA Report SS 80/2, 1980.
"Holding Down Bolts for Chimneys in Earthquakes", Proceedings 1980 Australasian Institute of Metals Conference.
Whittaker, D. and Walpole, W.R., "Bolted End Plate Connections for Seismically Designed Steel Frames", Research Report No. 82-11, Civil Engineering Department, University of Canterbury, June 1982.
Popov, E.P. and Pinkney, R., "Cyclic Yield Reversals in Steel Building Connections", A.I.S.C. Journal, Vol. 8, No. 3, July 1971.
Yura, J.A., "The Effective Length of Columns in Unbraced Frames", A.I.S.C. Journal, April 1971.
Park, R. and Paulay, T., "Reinforced Concrete Structures", John Wiley and Sons, New York, 1975. DOI: https://doi.org/10.1002/9780470172834
Rosenblueth, E. et al, "Design of Earthquake Resistant Structures", John Wiley and Sons, New York, 1980.
Hjelmstad, K.D. and Popov, E.P., "Characteristics of Eccentrically Braced Frames", Journal of the Structural Division, ASCE, Vol. 110, No. 2, Feb. 1984. DOI: https://doi.org/10.1061/(ASCE)0733-9445(1984)110:2(340)
Walpole, W.R. and Butcher, G.W., "Beam Design", Section C - NZNSEE Study Group for the Seismic Design of Steel Structures, Bull. NZNSEE, Vol. 18, No. 4, December 1985, pp.337-343. DOI: https://doi.org/10.5459/bnzsee.18.4.337-343
