Composite design
DOI:
https://doi.org/10.5459/bnzsee.18.4.381-396Abstract
This paper is the result of deliberations of the Society's Study Group for the seismic design of steel structures.
References
HERA Design Guide Part 13: Composite Construction - published in August 1985, available from HERA, P.O. Box 76-134, Manukau City, Auckland.
"Composite Steel Beams in Buildings - A Composite Construction Design Guide" published by the Australian Institute of Steel Construction, 1976.
Patton, R.N., "Analysis and Design Methods", Section B or the NZNSEE Study Group on the Seismic Design of Steel Structures, Bull. NZNSEE, Vol. 18, No. 4, December 1985.
Humar, J.L., "Composite Beams Under Cyclic Loading", Journal of the Structural Division, ASCE, October 1979.
Lecture notes for the HERA Steel Design, Detailing and Supervision Course, Section 12.6.
Rotter, J.M. and Ansourian, P., "Cross-Section Behaviour and Ductility in Composite Beams", Proceedings of the Institution of Civil Engineers, Part 2, Vol. 67, 1979, Paper 8213, pp. 453-474. DOI: https://doi.org/10.1680/iicep.1979.2468
Ansourian, P., "Plastic Rotation of Composite Beams", Research Report No. R371, University of Sydney, 1980.
Daniels, J.H., Kroll, G.D. and Fisher, J.W., "Behaviour of Composite Beam to Column Joints", Journal of the Structural Division, ASCE, Vol. 96, No. ST3, March 1970, pp. 671-686.
NZS 3101 : 1982 : Part 1 - The Design of Concrete Structures, New Zealand.
NZS 3101:1982: Part 2 Commentary to Part 1.
Morrison, J., "Design of Continuous Composite Beams for Buildings", Arup Journal, Vol. 9, No. 2, 1974.
Ansourian, P., "Experiments on Continuous Composite Beams", Proceedings of the Institute of Civil Engineers, Vol. 73, Part 2, 1982, Paper 8506, pp. 25-51. DOI: https://doi.org/10.1680/iicep.1982.1871
Climenhaga, J.J. and Johnson, R.P., "Local Buckling in Continuous Composite Beams", The Structural Engineer, Vol. 50, No. 9, 1972, pp. 367-374.
HERA Design Guide Part 9: Behaviour and Design of Thin Plates, published in 1985.
"Standardised Structural Connections Manual, Parts A and B", published by the Australian Institute of Steel Construction, Third Edition, 1984.
HERA Design Guide Part 10.2: "Design of Moment Resisting Bolted Endplate Connections", published 1984.
Nicholas , C.J.A., "Connection Design", Section G of the NZNSEE Study Group on the Seismic Design of Steel Structures, Bull. NZNSEE, Vol. 18, No. 4, December 1985.
Ansourian, P., "Shear in Composite Beam - Column Connections", Proceedings of the Institute of Civil Engineers, Vol. 71, Part 2, 1981, Paper 852, pp.1131-1147. DOI: https://doi.org/10.1680/iicep.1981.1759
Wang, L.R. and Gotschall, J.A., "Computer Aided Design of Stub Girder System", Engineering Journal, AISC, Vol. 17, No. 2, 1980.
Chienm E.Y.L. and Ritchie, J.K., "Design and Construction of Compo- site Floor Systems", published by the Canadian Institute of Steel Construction, 1984.
Bjorhovde, R. and Zimmerman , T.J., "Some Aspects of Stub-Girder Design", Engineering Journal, AISC, Vol. 17, No. 3, 1980.
Park, R. and Paulay, T., "Reinforced Concrete Structures", published by Wiley - Interscience , 1975 . DOI: https://doi.org/10.1002/9780470172834
BS 5400 Part 5 : 1979 - Code of Practice for the Design of Composite Bridges.
Yura, J.A., "The Effective Length of Columns in Unbraced Frames", AISC, Engineering Journal, April 1971.
Baldelli, J.A., "Steel Shear Walls for Existing Buildings", Engineering Journal, AISC, Vol. 20, No. 2, 1983.
Canon, T.J. and Dean, R.G., "Structural Steel Plated Shear Walls", Vol. 5 of the Proceedings of the 8th World Conference on Earthquake Engineering, San Francisco, 1984, pp.1237-1244.
