Evaluation of earthquake response of low-rise structures using design codes and local specifications
DOI:
https://doi.org/10.5459/bnzsee.16.4.331-344Abstract
Most earthquake engineering research projects are concerned with the analysis and design of high-rise buildings. Comparisons of actual earthquake forces with pseudo-static design forces recommended by various building codes indicate that in actual earthquakes the forces in low-rise buildings can be up to three to five times the pseudo-static design forces.
This paper is concerned with evaluating and comparing the earthquake response of low-rise buildings calculated using local response spectra and real time-histories with various Building Code Recommendations. It is shown that Building Code Recommendations underestimate the structural response.
References
Bathe, K.J., Wilson, E.L., and Peterson, F.E., "SAP IV - A Structural Analysis Program for Static and Dynamic Response of Linear System" Report No EERC 73-11, Earthquake Engineering Research Centre, University of California at Berkeley, Berkeley, Calif. June 1973.
Blume, J.A., "Building Columns under Strong Earthquake Exposure." Journal of the Structural Division, ASCE, Vol. 97, No. ST 9, Sept. 71.
Blume, J.A., "Hi-Rise Building Characteristics and Response Determined from Nuclear Seismology." Bulletin of Seismological Society of America, Vol. 62, No. 2, Apr. 72, pp. 519-540.
Clough, R.W., and Penzien, J., "Dynamics of Structures", McGraw Hill, New York, 1975.
Davidson, J.H., and Adams , P.F., "Stability of Braced and Unbraced Frames", Journal of the Structural Division, ASCE, Vol. 100. No. ST 2, Feb. 74.
Earthquake Resistant Regulations A World List, International Association for Earthquake Engineering, August 1980. "
Harris , J.R., Fenves, S.J., Wright, R.N., "Logical Analysis of Tentative Seismic Provisions," Journal of the Structural Division, ASCE, Vol. 107, No. ST 8, August 1981.
Hart, G.C., DiJulio Jr., R.M., and Lew, M., "Torsional Response of High-Rise Buildings", Journal of the Structural Division, ASCE, Vol. 101, No. ST 2, Feb. 1975.
Humar, J.L., "Seismic Design of Buildings Using a Time-History Method," Proceedings , Third Canadian Conference on Earthquake Engineering, June 1979, pp. 609-651.
Hudson , D.E., and Brady, A.G., "Strong motion earthquake accelerograms", Report No. EERL 71-50, Earthquake Engineering Research Laboratory, California Institute of Technology, Pasadena, California 1971.
Hutchinson, G.L., and Tscinios, T.G. "Theoretical assessment of the behaviour of arch dams for seismic loading," I.CE. , London 1980. DOI: https://doi.org/10.1680/dae.01237.0029
Montgomey, C.J., and Hall, W.J., "Seismic Design of Low-Rise Steel Buildings", Journal of the Engineering Mechanics Division, ASCE, Vol. 105, No. ST 10, Oct. 1979
Navidi, A., "Response Spectra for Ancona-Rocca, Italy," Report No. 81-1, Department of Civil Engineering, King's College, London.
Newmark, N.M., "Earthquake Resistant Design and ATC Provision," Proceedings, Third Canadian Conference on Earthquake Engineer- ing, June 1979 , pp. 745-775.
Newmark, N.M., and Rosenbluth, E., "Fundamentals of Earthquake Engineering," Prentice Hall Inc. 1971.
Nigam, N.C., and Jennings , P.C., "Digital Calculation of Response Spectra from Strong-motion earthquake Records", Earthquake Engineering Research Laboratory, California Institute Technology, Pasadena, California 1968.
Recommended Lateral Force Requirements, Structural Engineers Association of California (SEAOC), California, 1978.
Steel Designers' Manual, Fourth Edition, Crosby Lockwood & Sons Ltd, 1975.
"Tentative Provisions for the Development of Seismic Regulations for Buildings", Applied Technology Council, Report ATC 3-06, June 1978.
Uniform Building Code, International Conference of Building Officials, Whittier, California, 1979.