Structural Engineering

All Items

• Theoretical and experimental evaluation of timber-framed partitions under lateral drift

  Jitendra Bhatta, Joshua Mulligan, Rajesh P. Dhakal, Timothy J. Sullivan, Hans Gerlich, Frank Kang

  263-281

• Hybrid posttensioned rocking (HPR) frame buildings: Low-damage vs low-loss paradox

  Rajesh Dhakal

  i-viii

• The oscillation resistance ratio (ORR) for understanding inelastic response

  Hossein Soleimankhani, Greg MacRae, Tim Sullivan

  299-312

• Recycling of damaged RC frames: Replacing crumbled concrete and installing steel haunches below/above the beam at connections

  Naveed Ahmad, Arifullah, Babar Ilyas, Sida Hussain

  282-298

• Evidence collected for peer review of buckling-restrained braced frames in New Zealand

  Dan Court-Patience, Mark Garnich

  197-210

• Design recommendations to prevent global out-of-plane instability of rectangular reinforced concrete ductile walls

  Farhad Dashti, Rajesh Dhakal, Stefano Pampanin

  211-227

• Designing and detailing transverse reinforcement to control bar buckling in rectangular RC walls

  Mayank Tripathi, Rajesh Dhakal

  228-242

• Seismic collapse safety of reinforced concrete moment resisting frames with/without beam-column joint detailing

  Naveed Ahmad, Muhammad Rizwan, Muhammad Ashraf, Akhtar Naeem Khan, Qaisar Ali

  1-20

• BRB system stability considering frame out-of-plane loading and deformation zone

  Gregory MacRae, Chin-Long Lee, Saul Vazquez-Colunga, Jian Cui, Saeid Alizadeh, Liang-Jiu Jia

  31-39

• Structural rehabilitation using high damping rubber bearing (HDRB)

  Ali Vatanshenas, Takahiro Mori, Nobuo Murota

  49-57

• Experimental study of the seismic performance of plasterboard partition walls with seismic gaps

  Joshua Mulligan, Timothy Sullivan, Rajesh Dhakal

  175-188

• Automated structural dynamic modelling using model-free health monitoring results

  Jeanne Tondut, J Geoffrey Chase, Cong Zhou

  189-202

• Lateral shear strength of rectangular RC columns subjected to combined P-V-M monotonic loading

  Aysha M Zaneeb, Rupen Goswami, C V R Murty

  227-241

• Seismic performance of non-structural elements (SPONSE) and Learning from earthquakes (LFE) NZ Perspective

  Rajesh Dhakal

  113-115

• A practice-oriented method for estimating elastic floor response spectra

  Kieran Haymes, Timothy Sullivan, Reagan Chandramohan

  116-136

• Serviceability fragility functions for New Zealand residential windows

  David Carradine, Aman Kumar, Roger Fairclough, Graeme Beattie

  137-143

• Experimental investigation into the seismic fragility of a commercial glazing system

  Fransiscus Arifin, Timothy Sullivan, Rajesh Dhakal

  144-149

• Seismic performance of school buildings in 2017 Ezgeleh earthquake, Iran

  Mehdi Kahrizi, Mehrzad TahamouliRoudsari

  70-82

• Analysis of damage data collected for wine storage tanks following the 2013 and 2016 New Zealand earthquakes

  Mohsen Yazdanian, Jason Ingham, Christopher Kahanek, Nicholas Cradock-Henry, Joanna Fountain, Dmytro Dizhur

  83-100

• Research programme on seismic performance of reinforced concrete walls Key recommendations

  Alex Shegay, Farhad Dashti, Lucas Hogan, Yiqiu Lu, Arsalan Niroomandi, Pouya Seifi, Tongyue Zhang, Rajesh Dhakal, Kenneth Elwood, Richard Henry, Stefano Pampanin

  54-69

• Seismic capacity of RC frame buildings with masonry infill damaged by past earthquakes

  Hamood Alwashali, Md. Shafiul Islam, Debasish Sen, Jonathan Monical, Masaki Maeda

  13-21

• Quantifying the effects of epoxy repair of reinforced concrete plastic hinges

  Kai J. Marder, Kenneth J Elwood, Christopher J. Motter, G. Charles Clifton

  37-51

• A detailed inventory of medium to high-rise buildings in Wellington's central business district

  Aishwarya Puranam, Olga Filippova, Jacob Pastor-Paz, Max Stephens, Kenneth J. Elwood, Najif Ismail, Ilan Noy, Eyitayo Opabola

  172-192

• Rapid assessment of peak storey drift demands on reinforced concrete frame buildings

  Timothy J. Sullivan

  109-118

• Ground motion input for nonlinear response history analysis Practical limitations of NZS 1170.5 and comparison to US standards

  Gareth J. Morris, Andrew J. Thompson, James N. Dismuke, Brendon A. Bradley

  119-133