Structural Engineering

All Items

• Static loading test on RC beam-column sub-assemblages with walls

  Seitaro Tajiri, Akira Moriya

  555-564

• International research framework and priorities for reinforced concrete wall buildings

  Richard S. Henry, Kenneth J. Elwood, John W. Wallace

  608-615

• Assessment of ultimate drift capacity of RC shear walls by key design parameters

  Chanipa Netrattana, Rafik Taleb, Hidekazu Watanabe, Susumu Kono, David Mukai, Masanori Tani, Masanobu Sakashita

  482-493

• Experimental study on the seismic behaviour of RC beams with standing and hanging walls

  Koichi Kusunoki, Chikashi Nishikura, Akira Tasai

  537-546

• Full-scale testing of reinforced concrete frame buildings with attached walls considering damage control design

  Toshikazu Kabeyasawa, Tomohisa Mukai, Hiroshi Fukuyama, Haruhiko Suwada, Hiroto Kato

  586-594

• Effects of floor slabs on the flexural strength of beams in reinforced concrete buildings

  Toshimi Kabeyasawa, Toshikazu Kabeyasawa, Hiroshi Fukuyama

  517-526

• Residual seismic capacity of ductile RC frame with wing walls based on full-scale loading test

  Tomohisa Mukai, Toshikazu Kabeyasawa, Masanori Tani, Haruhiko Suwada, Hiroshi Fukuyama

  565-573

• The 2016 Meinong Taiwan earthquake Learning from earthquakes report

  Richard S. Henry, Bo-Yao Lee, David McGuigan, John Finnegan, Gordon Ashby

  436-468

• Performance of reinforced concrete buildings in the 2016 Kumamoto earthquakes and seismic design in Japan

  Mehdi Sarrafzadeh, Ken J. Elwood, Rajesh P. Dhakal, Helen Ferner, Didier Pettinga, Mike Stannard, Masaki Maeda, Yoshiaki Nakano, Tomihisa Mukai, Takuya Koike

  394-435

• Performance of winery facilities during the 14 November 2016 Kaikōura earthquake

  Dmytro Dizhur, Gye Simkin, Marta Giaretton, Giuseppe Loporcaro, Alessandro Palermo, Jason Ingham

  206-224

• Damage to non-structural elements in the 2016 Kaikōura earthquake

  Andrew Baird, Helen Ferner

  187-193

• Log house performance in the 2016 Kaikoura earthquake

  Andy Buchanan, Daniel Moroder

  225-236

• Performance of early masonry, cob and concrete buildings in the 14 November 2016 Kaikoura earthquake

  Dmytro Dizhur, Marta Giaretton, Jason Ingham

  194-205

• Damage to concrete buildings with precast floors during the 2016 Kaikoura earthquake

  Richard S. Henry, Dmytro Dizhur, Kenneth J. Elwood, John Hare, Dave Brunsdon

  174-186

• Performance of road bridges during the 14 November 2016 Kaikōura Earthquake

  Alessandro Palermo, Royce Liu, Adnan Rais, Brandon McHaffie, Kaveh Andisheh, Stefano Pampanin, Roberto Gentile, Iolanda Nuzzo, Mario Granerio, Giuseppe Loporcaro, Chris McGann, Liam Wotherspoon

  253-270

• Strategies for the seismic upgrading of pairs of buildings in a historic precinct

  Andrew Charleson, Mark Southcombe

  50-58

• Axial elongation in ductile reinforced concrete walls

  Ericson Encina, Yiqiu Lu, Richard S. Henry

  305-318

• Authors’ response

  Dmytro Dizhur, Rajesh P. Dhakal, Jitendra Bothara, Jason M. Ingham

  342-343

• Nonlinear modelling and seismic behaviour of precast concrete structures with steel shear walls

  Farhad Behnamfar, Rafeek Artoonian, Mehdi Ghandil

  293-304

• “Building typologies and failure modes observed in the 2015 Gorkha (Nepal) earthquake” Vol. 49, No. 2

  Richard Sharpe

  341-342

• Numerical methodology for dynamic analysis of buildings with friction dampers

  Subhransu S. Swain, Sanjaya K. Patro, Ravi Sinha

  245-266

• Quasi-static cyclic testing of emulative cast-in-place connections for Accelerated Bridge Construction in seismic regions

  Mustafa Mashal, Samuel White, Alessandro Palermo

  267-282

• Equivalent frame modelling of an unreinforced masonry building with flexible diaphragms A case study

  Yasuto Nakamura, Hossein Derakhshan, Abdul H. Sheikh, Jason M. Ingham, Michael C. Griffith

  234-244

• Seismic earth forces against embedded retaining walls Insights from numerical modelling

  C.Y. Chin, Claudia Kayser, Michael Pender

  200-210

• Prediction of fundamental period of regular frame buildings

  Pavan K. Aninthaneni, Rajesh P. Dhakal

  175-189