Structural Engineering

All Items

• Building typologies and failure modes observed in the 2015 Gorkha (Nepal) earthquake

  Dmytro Dizhur, Rajesh P. Dhakal, Jitendra Bothara, Jason M. Ingham

  211-232

• Panel connection details in existing New Zealand precast concrete buildings

  Pouya Seifi, Richard S. Henry, Jason M. Ingham

  190-199

• Seismic assessment and improvement of unreinforced stone masonry buildings Literature review and application to New Zealand

  Marta Giaretton, Dmytro Dizhur, Francesca da Porto, Jason M. Ingham

  148-174

• Seismic earth forces against embedded retaining walls Insights from numerical modelling

  C.Y. Chin, Claudia Kayser, Michael Pender

  200-210

• Using failure analysis tools to establish seismic resilience objectives for building components and systems

  Mike W. Mieler, S.R. Uma, Judith Mitrani-Reiser

  86-97

• Corrections to “Floor diaphragms and a truss method for their analysis” Bulletin of the NZSEE, Vol. 48, No. 1

  John Scarry, Rajesh P. Dhakal

  146

• Characterising the in-plane seismic performance of infill masonry

  Kathy Sassun, Timothy J. Sullivan, Paolo Morandi, Donatello Cardone

  98-115

• Experimental studies of a typical sprinkler piping system in hospitals

  Zhen-Yu Lin, Fan-Ru Lin, Juin-Fu Chai, Kuo-Chun Chang

  1-12

• Shaking table tests of typical B-ultrasound model hospital room in a simulation of the Lushan earthquake

  Duozhi Wang, Junwu Dai, Xiaoqing Ning

  116-124

• Measured response of instrumented buildings during the 2013 Cook Strait earthquake sequence

  Gye Simkin, Sherif Beskhyroun, Quincy Ma, Liam Wotherspoon, Jason Ingham

  223-234

• Corrections to “Floor diaphragms and a truss method for their analysis” Bulletin of the NZSEE, Vol. 48, No. 1

  John Scarry, Rajesh P. Dhakal

  274

• Smart semi-active MR damper to control the structural response

  Nikoo K. Hazaveh, J. Geoffrey Chase, Geoffrey W. Rodgers, Stefano Pampanin

  235-244

• Editorial

  Rajesh P. Dhakal

  i

• Performance evaluation of CWH base isolated building during two major earthquakes in Christchurch

  Cong Zhou, J. Geoffrey Chase, Geoffrey W. Rodgers, Adam Kuang, Stefanie Gutschmidt, Chao Xu

  264-273

• An inventory of unreinforced masonry churches in New Zealand

  Alessandra Marotta, Tatiana Goded, Sonia Giovinazzi, Sergio Lagomarsino, Domenico Liberatore, Luigi Sorrentino, Jason M. Ingham

  170-189

• In situ conditions affecting the ductility capacity of lightly reinforced concrete wall structures in the Canterbury earthquake sequence

  Gareth J. Morris, Desmond K. Bull, Brendon A. Bradley

  190-203

• Analytical simulation of seismic collapse of RC frame buildings

  Mohammad E. Koopaee, Rajesh P. Dhakal, Gregory MacRae

  157-169

• Innovative connections for precast concrete moment resisting frames

  Farhad Behnamfar, Hadi Rafizadeh, Mortza Omidi

  204-221

• Design of base-isolated buildings An overview of international codes

  Dario Pietra, Stefano Pampanin, Ron L. Mayes, Nicholas G. Wetzel, Demin Feng

  118-135

• Benefits of site-specific hazard analyses for seismic design in New Zealand

  Brendon A. Bradley

  92-99

• Shaking table tests of a base isolated structure with Double Concave Friction Pendulum bearings

  Felice C. Ponzo, Antonio D. Cesare, Gianmarco Leccese, Domenico Nigro

  136-144

• Supplemental dampers in base-isolated buildings to mitigate large isolator displacement under earthquake excitations

  Daniel H. Zelleke, Said Elias, Vasant A. Matsagar, Arvind K. Jain

  100-117

• Suitability of CFT columns for New Zealand moment frames

  Ponpong Chunhaviriyakul, Gregory A. MacRae, Dave Anderson, G. Charles Clifton, Roberto T. Leon

  63-79

• URM bearing wall building seismic risk mitigation on the west coast of the United States A review of policies and practices

  Brandon Paxton, Fred Turner, Ken Elwood, Jason M. Ingham

  31-40

• Floor diaphragms and a truss method for their analysis

  J.M. Scarry

  41-62