Structural Engineering

All Items

• Assessment of the torsional behaviour of hollow core slabs

  Ana Isabel Sarkis Fernandez, Timothy J Sullivan, Emanuele Brunesi, Roberto Nascimbene

  104-114

• Investigating the impact of design criteria on the expected seismic losses of multi-storey office buildings

  Michael Williamson, Luis John, Tim Sullivan

  11-28

• Seismic effects of bracing irregularity of light timber-framed buildings

  Angela Liu, Minghao Li

  29-37

• Estimating fire following earthquake risk for Wellington City, New Zealand

  Finn Scheele, Biljana Lukovic, Jose Moratalla, Alexandre Dunant, Nick Horspool

  241-256

• Key drivers in using low damage seismic designs in Christchurch buildings

  Juliet Skidmore, Gabriele Granello, Alessandro Palermo

  214-228

• Implications of seismic detailing on the fire performance of post-tensioned timber frames

  Paul Horne, Alessandro Palermo, Anthony Abu, Peter Moss

  229-240

• System overstrength factor induced by interaction between structural reinforced concrete walls, floors and gravity frames: Analytical formulation

  Reza E. Sedgh, Rajesh P. Dhakal, Chin-Long Lee, Athol Carr

  138-154

• A method for seismic design of RC frame buildings using fundamental mode and plastic rotation capacity

  A. R. Vijayanarayanan, Rupen Goswami, C. V. R. Murty

  112-128

• Highlighting the need for multiple loading protocols in bi-directional testing

  Giovanni De Francesco, Timothy Sullivan, Cecilia Nievas

  80-94

• Experimental and numerical analysis of the lateral response of full-scale bridge piers

  Pavan Chigullapally, Lucas Hogan, Liam Wotherspoon, Max Stephens, Michael Pender

  95-111

• Incremental dynamic analysis of rigid blocks subjected to ground and floor motions and shake table protocol inputs

  Danilo D'Angela, Gennaro Magliulo, Edoardo Cosenza

  64-79

• Industry impact of QuakeCoRE Flagship Programme 4

  Matthew Fox, Jared Keen

  58-63

• The oscillation resistance ratio (ORR) for understanding inelastic response

  Hossein Soleimankhani, Greg MacRae, Tim Sullivan

  299-312

• Recycling of damaged RC frames: Replacing crumbled concrete and installing steel haunches below/above the beam at connections

  Naveed Ahmad, Arifullah, Babar Ilyas, Sida Hussain

  282-298

• Theoretical and experimental evaluation of timber-framed partitions under lateral drift

  Jitendra Bhatta, Joshua Mulligan, Rajesh P. Dhakal, Timothy J. Sullivan, Hans Gerlich, Frank Kang

  263-281

• Hybrid posttensioned rocking (HPR) frame buildings: Low-damage vs low-loss paradox

  Rajesh Dhakal

  i-viii

• Evidence collected for peer review of buckling-restrained braced frames in New Zealand

  Dan Court-Patience, Mark Garnich

  197-210

• Design recommendations to prevent global out-of-plane instability of rectangular reinforced concrete ductile walls

  Farhad Dashti, Rajesh Dhakal, Stefano Pampanin

  211-227

• Designing and detailing transverse reinforcement to control bar buckling in rectangular RC walls

  Mayank Tripathi, Rajesh Dhakal

  228-242

• Structural rehabilitation using high damping rubber bearing (HDRB)

  Ali Vatanshenas, Takahiro Mori, Nobuo Murota

  49-57

• Seismic collapse safety of reinforced concrete moment resisting frames with/without beam-column joint detailing

  Naveed Ahmad, Muhammad Rizwan, Muhammad Ashraf, Akhtar Naeem Khan, Qaisar Ali

  1-20

• BRB system stability considering frame out-of-plane loading and deformation zone

  Gregory MacRae, Chin-Long Lee, Saul Vazquez-Colunga, Jian Cui, Saeid Alizadeh, Liang-Jiu Jia

  31-39

• Automated structural dynamic modelling using model-free health monitoring results

  Jeanne Tondut, J Geoffrey Chase, Cong Zhou

  189-202

• Lateral shear strength of rectangular RC columns subjected to combined P-V-M monotonic loading

  Aysha M Zaneeb, Rupen Goswami, C V R Murty

  227-241

• Experimental study of the seismic performance of plasterboard partition walls with seismic gaps

  Joshua Mulligan, Timothy Sullivan, Rajesh Dhakal

  175-188